Prepare the Surfaces
- Use a clean cloth to remove dirt, grease, and moisture from the surfaces to be joined. This ensures a better bond.
- Ensure that the ends of the pipes are cut straight and smooth for a proper fit.
Apply the Solvent Cement
- Dip the brush or applicator into the solvent cement (which is provided in the container already).
- Coat both the inside of the fitting and the outside of the pipe with a liberal amount of cement. Ensure even coverage without excess dripping.
Assemble the Joint
- Quickly insert the pipe into the fitting, giving it a slight twist to ensure an even distribution of the cement.
- Maintain pressure on the joint for about 30 seconds to allow the bond.
Clean Up
- Use a cloth to wipe away any excess solvent cement from joint.
Safety Precautions
- Always work in a well-ventilated area to avoid inhaling fumes.
- Wear gloves and goggles to protect your skin and eyes from contact with the cement.
- Keep the plastochem solvent cement in a cool, dry place, and ensure it is tightly sealed when not in use.
Common Mistakes to Avoid
- Skipping the cleaning step can lead to weak bonds.
- Follow application guidelines for optimal results.
- Rushing the process can lead to joint failure.
