Description
- Brookfield Viscosity – Minimum 500 cP at 27°C.
- Store in Cool and Dry Place at Room Temperature.
- Quality Formulation for Portable Hot and Cold water up to 82°C (180°F).
Know How to Use CPVC Solvent Cement
Application Areas:
Plastochem CPVC Solvent Cement i s formulated for use on cold and hot water CPVC piping systems up to 180°F (82°C) maximum, ideal for both residential & commercial plumbing, recreational vehicles and in industrial systems. In accordance with ASTM F 493, for use in DVW systems and sewer applications. Onestep cement can be used for CPVC Pipe & Fitting from ½” (20mm) through 4” (100mm) without primer, if local code permits.
Quality Assurance
Plastochem CPVC Solvent Cement is carefully evaluated to assure that consistent high quality is maintained. Laboratory testing and regular check helps to track the quality consistency of the product. Batch identification code is stamped on each container and containers are tightly sealed to avoid evaporation of solvents which provide better shelf life.
Storage & shelf life
Store in cool and dry place, preferably away from direct sun light. The material has a life of 2 year in tightly sealed containers in a proper storage container. Stability depends on evaporation of the solvent when the container is opened. Don’t add any thinner to change the viscosity of solvent cement, it may change its general properties.
Store between 40oF(5°C) and 90°F(33°C).
Limitations & Precautions:
- Replace the cap immediately after use. Avoid using fingers for application.
- Wear safety glasses with side shields and wear rubber gloves.
- Flammable material. Keep away from naked flame and reach of children.
- Do not use in system using or being tested by compressed.
Frequently Asked Questions
Yes, Plastochem CPVC Solvent Cement is NSF-certified, tested and approved as NSF/ANSI/CAN 61 standards. This ensures the product is safe for use in potable (drinking) water systems and meets global plumbing code requirements.
Initial curing can take 15 minutes to 2 hours, with full curing taking 24 hours for maximum strength.
CPVC solvent cement is specifically designed for CPVC and is not recommended for PVC.
Yes. Our CPVC solvent cement is specifically designed to handle hot water up to 82°C (180°F), while PVC/UPVC cements are ideal for cold water and drainage systems.
For best results, always clean and dry the pipe and fitting surfaces before application. Use sandpaper or a dry cloth to remove dirt, grease, or old adhesive residues.
Reviews
There are no reviews yet.