PU Flex Tile Adhesive

Description

TILEOX™ 504  PU Flex Tile Adhesive is a two-component, ready-to-mix Epoxy thin-set adhesive designed for fixing large format of tile and stone sizes. It excels at adhering all types of tiles and stones to different substrate, including metal, glass and all the substrates which are highly deformable and expandable, absorbent and non-absorbent. High adhesion adhesive with no vertical slip-on deformable substrates, ideal for use in green building. This is the Best All Purpose Tile Adhesive in India.

• Weatherproof and highly flexible.
• Metal, Plywood, Drywall boards
• Extreme Shear bond strength.
• Large Tiles & Natural stones.
• Extended open time.
• Versatile all-purpose Adhesive

APPLICATION PROPERTIES:

Limitations & Precautions:

• It is a ready to use tile adhesive, do not add water or cement further.
• To avoid lumps, always add powder to water and mix it slowly with low-speed mixer not with hands.
• Surface should be dry, clean and free from all the dirt, oil etc. before application.
• Use of notched trowel is mandatory to achieve required thickness of adhesive.
• Protect it from rainfall and foot traffic for at least 24 hours.
• Designer/Applicator must evaluate the use of an additional mechanical fastening system for extra security for more than 3m height (such as steel hooks fastened to the substrate).
• Don’t use on surfaces which are subject to vibrations.
• Use of gloves and goggles is recommended. In case of contact, rinse with clean water.
• Keep out of reach of children.

Method of Application:

• Surface should be clean and free from all the dirt, oil, grease, concrete sealer or curing compounds.
• They should be structurally sound, leveled, properly cured, undamaged, rigid, resistant, pre-wet and protected against damp rising.
• Expansion joints to be filled properly with suitable sealants (not with tile adhesive).
• Installation should be done on a dry surface. New Concrete slabs should be damp cured and at least 28 days old prior to application.

• Pour Hardener (Part B) in Resin (Part A) into a clean mixing bucket/container and mix it gradually with slow speed mixer (<500 rpm) to get a uniform, lump-free paste in workable consistency. Don’t add additional water.
• Mix only that much quantity which can be consumed in an hour.
• Leave the mixture for 5 minutes before use.

• Apply the mixed material uniformly on the surface with the help of flat side of notched trowel. Additional mortar should be applied with the notched edge of the trowel.
• Use proper size of notched trowel to ensure full bedding of tile.
• For larger size tiles with sides > 2 feet, apply mortar on the back of the tile as well with flat sided notched trowel.
• Then press the tile firmly and hammer gently with soft mallet to ensure the perfect bond.
• Check the adhesive ribs periodically and if a skin has formed, removed the dried adhesive and apply fresh adhesive.
• Use Suitable support along with adhesive for fixing tiles on vertical surfaces.
• Clean the surplus adhesive from the joints.
• As required, use tile spacer to provide grout joints between tiles/stones and leave the tile applied untouched for 24 hours.
• Remove the tile spacers after 24 hours when tiles are firmly set.
• Then Grout with TileOX™ 402 Epoxy tile grout for stainless and crack resistant joints.
• Clean any excess adhesive/grout/Epoxy grout with TileOX™ Tile Cleaner and then wipe with a damp sponge/cloth.